PrimaCreator
PrimaSelect TPU 77D
TPU
Print parameters
| Nozzle | 215–240 °C |
|---|---|
| Bed | 55–80 °C |
| Speed | 20–50 mm/s |
| Fan | 100 % |
| Drying (temp / time) | — |
| Density | 1.24 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 42.5MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 355% |
| Flexural strength | 71.5MPa |
| Impact strength | 25.5kJ/m² |
| Hardness | 77D Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.