Prusament
PC Space Grade
PC
Requires enclosureRequires hardened nozzle
Composition / filler: PC with carbon additives
Print parameters
| Nozzle | 280–300 °C |
|---|---|
| Bed | 110–130 °C |
| Speed | ≤ 100 mm/s |
| Fan | 0–100 % |
| Drying (temp / time) | — |
| Density | 1.21 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 72MPa |
|---|---|
| Tensile modulus | 3100MPa |
| Elongation at break | 3.8% |
| Flexural strength | 89MPa |
| Impact strength | –kJ/m² |
| Hardness | 83D Shore |
| HDT (heat deflection) | 137.6°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.