Prusament
TPU 95A
TPU
Composition / filler: ether diol type TPU polymer
Print parameters
| Nozzle | 220–240 °C |
|---|---|
| Bed | 55–75 °C |
| Speed | ≤ 30 mm/s |
| Fan | 30–50 % |
| Drying (temp / time) | 60 °C / 4 h |
| Density | 1.25 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 41.4MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 563.3% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 92A Shore |
| HDT (heat deflection) | 78.6°C |
| Glass transition (Tg) | — |
| VICAT | 101.6°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.