Prusament
Woodfill
PLA
Composition / filler: PLA filled with wood particles
Print parameters
| Nozzle | 185–205 °C |
|---|---|
| Bed | 50–70 °C |
| Speed | ≤ 200 mm/s |
| Fan | 100 % |
| Drying (temp / time) | — |
| Density | 1.16 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 21/23XY/ZMPa |
|---|---|
| Tensile modulus | 900/800XY/ZMPa |
| Elongation at break | 4.3/4.1XY/Z% |
| Flexural strength | 30/37XY/ZMPa |
| Impact strength | 17/21XY/ZkJ/m² |
| Hardness | 67D Shore |
| HDT (heat deflection) | 58.2°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Verified against manufacturer datasheet
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.