purefil
MABS
MABS
Requires enclosure
Composition / filler: Methyl methacrylate ABS (transparent ABS variant)
Print parameters
| Nozzle | 210–260 °C |
|---|---|
| Bed | 80–110 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 90 °C / 4 h |
| Density | 1.08 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 42MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 3% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 76D Shore |
| HDT (heat deflection) | 97°C |
| Glass transition (Tg) | — |
| VICAT | 104°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.