purefil
PEEK CF10
PEEK-CF
Requires enclosureRequires hardened nozzle
Composition / filler: PEEK + 10% carbon fibre
Print parameters
| Nozzle | 380–450 °C |
|---|---|
| Bed | 160–200 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 150 °C / 4 h |
| Density | 1.33 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 160MPa |
|---|---|
| Tensile modulus | 7000MPa |
| Elongation at break | 1.7% |
| Flexural strength | –MPa |
| Impact strength | 45kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 300°C |
| Glass transition (Tg) | — |
| VICAT | 225°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.