Qidi Tech
ABS Rapido
ABS
Composition / filler: Acrylonitrile-butadiene-styrene terpolymer
Print parameters
| Nozzle | 220–250 °C |
|---|---|
| Bed | 80–100 °C |
| Speed | 40–80 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | — |
| Density | 1.05 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 41MPa |
|---|---|
| Tensile modulus | 3850MPa |
| Elongation at break | 11% |
| Flexural strength | 77.5MPa |
| Impact strength | 40kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 85°C |
| Glass transition (Tg) | — |
| VICAT | 95°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.