Qidi Tech
PC/ABS-FR
PC/ABS
Requires enclosure
Composition / filler: PC/ABS alloy with non-halogen flame retardant
Print parameters
| Nozzle | 240–270 °C |
|---|---|
| Bed | 100–110 °C |
| Speed | 30–300 mm/s |
| Fan | 0–20 % |
| Drying (temp / time) | 75 °C / 4 h |
| Density | 1.19 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 52.51/34.26XY/ZMPa |
|---|---|
| Tensile modulus | 2588.73/2302.81XY/ZMPa |
| Elongation at break | 5.55/1.88XY/Z% |
| Flexural strength | 85.95/–XY/ZMPa |
| Impact strength | 8.39/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 83/–XY/Z°C |
| Glass transition (Tg) | 105 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.