Qidi Tech
PET-GF
PET-GF
Requires hardened nozzle
Composition / filler: 15% chopped glass fiber reinforced Polyethylene Terephthalate (PET-GF)
Print parameters
| Nozzle | 280–320 °C |
|---|---|
| Bed | 60–80 °C |
| Speed | 30–120 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 110 °C / 5 h |
| Density | 1.38 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 70.86/33.95XY/ZMPa |
|---|---|
| Tensile modulus | 4130.13/3322.37XY/ZMPa |
| Elongation at break | 2.56/1.14XY/Z% |
| Flexural strength | 114.87/–XY/ZMPa |
| Impact strength | 6.56/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 99.1°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.