Qidi Tech
PETG Rapido
PETG
Composition / filler: PETG
Print parameters
| Nozzle | 235–275 °C |
|---|---|
| Bed | 60–80 °C |
| Speed | ≤ 300 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | — |
| Density | 1.3 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 43/35XY/ZMPa |
|---|---|
| Tensile modulus | 1850/1700XY/ZMPa |
| Elongation at break | 8.5/6.5XY/Z% |
| Flexural strength | 74.5/58XY/ZMPa |
| Impact strength | 35.5/10XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 70°C |
| Glass transition (Tg) | 66 °C |
| VICAT | 83°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.