Qidi Tech
PETG-Tough
PETG
Composition / filler: Toughness-modified PETG with improved material flow for high-speed FDM printing
Print parameters
| Nozzle | 230–260 °C |
|---|---|
| Bed | 70–80 °C |
| Speed | 30–300 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | — |
| Density | 1.27 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 44.23/42.7XY/ZMPa |
|---|---|
| Tensile modulus | 1821.82/1955.67XY/ZMPa |
| Elongation at break | 14.04/4.51XY/Z% |
| Flexural strength | 71.4/–XY/ZMPa |
| Impact strength | 16.39/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 65°C |
| Glass transition (Tg) | 80 °C |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.