Qidi Tech
PLA-CF
PLA-CF
Requires hardened nozzle
Composition / filler: Chopped carbon fiber reinforced PLA (Polylactic Acid)
Print parameters
| Nozzle | 210–240 °C |
|---|---|
| Bed | 40–60 °C |
| Speed | 100–200 mm/s |
| Fan | 80–100 % |
| Drying (temp / time) | 50 °C / 5 h |
| Density | 1.25 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 54.92/24.09XY/ZMPa |
|---|---|
| Tensile modulus | 4020.55/2953.14XY/ZMPa |
| Elongation at break | 4.9/1.01XY/Z% |
| Flexural strength | 91.57/–XY/ZMPa |
| Impact strength | 6.65/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 52.6°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.