Qidi Tech
PLA-Metal
PLA
Composition / filler: Polylactic Acid (PLA)
Print parameters
| Nozzle | 190–220 °C |
|---|---|
| Bed | 30–60 °C |
| Speed | 40–80 mm/s |
| Fan | 50–100 % |
| Drying (temp / time) | — |
| Density | 1.2 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 31.5MPa |
|---|---|
| Tensile modulus | 3350MPa |
| Elongation at break | 8% |
| Flexural strength | 55MPa |
| Impact strength | 30kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 58°C |
| Glass transition (Tg) | 60 °C |
| VICAT | 62°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.