Qidi Tech
TPU-Aero
TPU
Composition / filler: TPU with active foaming components uniformly distributed in an unactivated state within the TPU matrix
Print parameters
| Nozzle | 230–270 °C |
|---|---|
| Bed | 30–45 °C |
| Speed | ≤ 100 mm/s |
| Fan | — |
| Drying (temp / time) | 75 °C / 5 h |
| Density | 1.15 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 9.8/–XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 598.69/–XY/Z% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 82A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.