Qidi Tech
UltraPA-CF25
PA-CF
Requires hardened nozzle
Composition / filler: 25% chopped carbon fiber reinforced high-temperature nylon with co-extrusion skin-core structure; outer skin is pure nylon resin with high layer adhesion, inner core is carbon fiber reinforced nylon resin
Print parameters
| Nozzle | 300–340 °C |
|---|---|
| Bed | 70–80 °C |
| Speed | 30–120 mm/s |
| Fan | 0 % |
| Drying (temp / time) | 90 °C / 5 h |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 118.19/–XY/ZMPa |
|---|---|
| Tensile modulus | 9989.47/–XY/ZMPa |
| Elongation at break | 1.62/–XY/Z% |
| Flexural strength | 184.19/–XY/ZMPa |
| Impact strength | 7.29/–XY/ZkJ/m² |
| Hardness | — |
| HDT (heat deflection) | 124.2°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.