Recreus
Filaflex Purifier
TPU
Composition / filler: Thermoplastic Polyether-Polyurethane elastomer (TPE-U) with additives for high printability and an innovative component that mineralises VOCs generated by air pollution
Print parameters
| Nozzle | 215–250 °C |
|---|---|
| Bed | 0 °C |
| Speed | 13–45 mm/s |
| Fan | 0–50 % |
| Drying (temp / time) | 55 °C / 1 h |
| Density | 1.17 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 43MPa |
|---|---|
| Tensile modulus | 20MPa |
| Elongation at break | 617% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | 82A Shore |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | -42 °C |
| VICAT | 113°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.