Recreus
PET-G CF
PETG-CF
Requires enclosureRequires hardened nozzle
Composition / filler: Carbon fibre-additivated amorphous PET copolymer (PETG - PET Glycol Modified)
Print parameters
| Nozzle | 245–260 °C |
|---|---|
| Bed | 70 °C |
| Speed | 32–110 mm/s |
| Fan | 0–40 % |
| Drying (temp / time) | 55 °C / 1 h |
| Density | 1.32 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 105MPa |
|---|---|
| Tensile modulus | 9000MPa |
| Elongation at break | 4% |
| Flexural strength | –MPa |
| Impact strength | 6.5kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 67°C |
| Glass transition (Tg) | — |
| VICAT | 80°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.