Recreus
PET-G HF
PETG
Requires hardened nozzle
Composition / filler: Highly modified PET copolymer amorphous (PETG - PET Glycol modified)
Print parameters
| Nozzle | 230–260 °C |
|---|---|
| Bed | 40–70 °C |
| Speed | 50–170 mm/s |
| Fan | 0–70 % |
| Drying (temp / time) | 55 °C / 1 h |
| Density | 1.29 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 50MPa |
|---|---|
| Tensile modulus | 3020MPa |
| Elongation at break | 31% |
| Flexural strength | –MPa |
| Impact strength | 58kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 62°C |
| Glass transition (Tg) | 80 °C |
| VICAT | 78°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.