Snapmaker
Matte PLA
PLA
Print parameters
| Nozzle | 190–230 °C |
|---|---|
| Bed | 25–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 55 °C / 6 h |
| Density | 1.31 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 23.2MPa |
|---|---|
| Tensile modulus | 1997MPa |
| Elongation at break | 27.8% |
| Flexural strength | 40.4MPa |
| Impact strength | 6.7kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 52°C |
| Glass transition (Tg) | 60.6 °C |
| VICAT | 62.7°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.