Snapmaker
SnapSpeed PLA
PLA
Print parameters
| Nozzle | 190–230 °C |
|---|---|
| Bed | 25–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | 55 °C / 6 h |
| Density | 1.23 g/cm³ |
Mechanical & thermal properties
| Tensile strength | 46MPa |
|---|---|
| Tensile modulus | 2878MPa |
| Elongation at break | 21.5% |
| Flexural strength | 76.5MPa |
| Impact strength | 6.1kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 52°C |
| Glass transition (Tg) | 59 °C |
| VICAT | 61°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.