Snapmaker
Wood PLA
PLA
Print parameters
| Nozzle | 190–210 °C |
|---|---|
| Bed | 25–60 °C |
| Speed | — |
| Fan | — |
| Drying (temp / time) | — |
| Density | — |
Mechanical & thermal properties
| Tensile strength | 23.2MPa |
|---|---|
| Tensile modulus | 2636MPa |
| Elongation at break | –% |
| Flexural strength | 52.9MPa |
| Impact strength | 2.1kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | 62 °C |
| VICAT | 60°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.