Spectrum Filaments
Asa X Cf10
ASA-CF
Requires enclosureRequires hardened nozzle
Print parameters
| Nozzle | 240–270 °C |
|---|---|
| Bed | 80–100 °C |
| Speed | 30–150 mm/s |
| Fan | 0–20 % |
| Drying (temp / time) | — |
| Density | — |
Mechanical & thermal properties
| Tensile strength | –MPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | –% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | 101°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.