Spectrum Filaments
Thermatech Pa
PA
Requires enclosure
Print parameters
| Nozzle | 250–280 °C |
|---|---|
| Bed | 60–90 °C |
| Speed | 30–150 mm/s |
| Fan | ≤ 100 % |
| Drying (temp / time) | — |
| Density | — |
Mechanical & thermal properties
| Tensile strength | 55/50XY/ZMPa |
|---|---|
| Tensile modulus | –MPa |
| Elongation at break | 2.7/3.4XY/Z% |
| Flexural strength | –MPa |
| Impact strength | –kJ/m² |
| Hardness | — |
| HDT (heat deflection) | –°C |
| Glass transition (Tg) | — |
| VICAT | –°C |
Data from manufacturer's website
This data comes from the manufacturer's technical sheets and website. FilamentCat only displays it — I don't guarantee it; verify with the manufacturer before printing. Values may vary by printer and conditions.